Download the STL Model of Michelangelo’s David
High-resolution 3D files adapted by ExploreDavid. Based on original scans by Scan the World, optimized for educational 3D printing.
Available Files
All versions below are FDM-friendly and prepared for most consumer 3D printers.
- Full Statue – Complete (57.2 MB)
- Top Half – Head to Waist (28.6 MB)
- Bottom Half – Waist to Feet (29 MB)
Model Overview
The original 3D model of Michelangelo’s David was created by Hugo Navarro (@hugonvrro_2062955) and published on Printables.com. ExploreDavid adapted and optimized the file specifically for educational desktop 3D printing, including slicing, scaling, and structural segmentation.
Credit: “David” by Hugo Navarro | Source: Printables.com
Print Recommendations
- Printer: FDM (e.g., Bambu Lab A1 Mini)
- Material: PLA or PLA+
- Layer Height: 0.08 – 0.12 mm
- Supports: Enabled
- Adhesion: Brim or raft advised
Finishing Guidelines
- Use epoxy putty or filler for seam coverage
- Sand with 800+ grit paper for surface refinement
- Optionally apply a matte primer to mimic marble
Usage Terms
This model is released under a Creative Commons Attribution-NonCommercial 4.0 International License. You may:
- Print and remix for personal or educational purposes
- Not sell or distribute commercially
- Must credit both @hugonvrro_2062955 and ExploreDavid.com in any public display
Share Your Print
Printed it? Modified it? Share it with us at contact@exploredavid.com or post online using #ExploreDavid. Exceptional projects may be featured in our gallery.